Removing and Installing Striker for Left or Right Rear Seat Back

52 26 022 - Removing and installing striker for left or right rear seat back





Necessary preliminary tasks:
- Move backrest back





Installation:
- Microencapsulated screws (Loctite) must be replaced and may not be reused
- Screw connection must be completed within 20 minutes (start of curing)
- Microencapsulated screws must not be retightened
- Clean thread of nut beforehand in event of repeated use





Remove cover from lock striker.





Release screws (1).
Tightening torque 52 26 04AZ [1][2]Seats.
Remove striker (2).

Installation:
Adjust striker Adjustments(2).





R57 Series only:
Release screws (1).
Tightening torque: 52 26 04AZ [1][2]Seats.
Remove striker (2).

Installation:
Adjust striker Adjustments(2).