Front Seat, Normal, Manual

52 13 000 - Removing and installing driver's or front passenger seat (normal/manual)





Warning!
Observe safety regulations for handling airbag modules and pyrotechnical seat belt tensioners.

Incorrect handling may trigger off pyrotechnical belt tensioners or the side airbag, which may result in injury.





Necessary preliminary tasks:
- Switch off ignition

- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead





Slide front forward as far as it will go.
Release screws (1).

Installation Note:
Replace screws and insert with Loctite.
Tightening torque 52 13 1AZ.





Slide front seat back as far as it will go.
Release screws (1).

Installation Note:
Replace screws and insert with Loctite.
Tightening torque 52 13 1AZ.

Unlock plug connections (2) and disconnect plug (3).





Important!
Cover entrance for protection purposes (risk of damage).
Lift out front seat.





Installation Note:
Carpet must not get between seat rails and floor pan near screw-fastening points (grating noises).