Tires: Testing and Inspection

00 00 ... - Tires: checking inflation pressure, correcting if necessary, checking external condition, tread depth and pattern

- Checking tire inflation pressure:

- Check tire inflation pressure in accordance with information plate on B-pillar

- Initialize Run Flat Indicator 36 11 000 Initializing Run Flat Indicator (RPA)

- Checking tire condition:

- Check tread depth of all tires with tire tread gauge

- Check tire tread surfaces and side walls for incisions and foreign particles such as nails or screws

- Check tire tread pattern for localized flattening and wear on one side; if necessary, carry out wheel/chassis alignment after consulting with customer

Note:
- For details of approved wheel-tire combinations, refer to KSD CD

- For reasons of driving safety, only use tires of the same type and tread pattern on a single vehicle

- Inform customer of any incorrect or worn tires