61 14 030 Removing and Installing/Replacing B+ Multifuse Distributor

61 14 030 Removing and installing/replacing B+ multifuse distributor







Necessary preliminary work:
- Remove right cowl panel cover
- Disconnect battery cable







NOTE: Battery shown removed for purposes of clarity.

Pull B+ distributor (1) in direction of arrow out of bracket (2).

Installation note:
Make sure B+ distributor (1) is correctly engaged on bracket (2).







Unlock catches (1) with a suitable tool and remove B+ distributor cover (2) towards rear from B+ distributor (3).

Installation note:
Make sure B+ distributor cover (2) is correctly seated on B+ distributor (3).







Slacken nut (1). Tightening torque 61 14 1AZ.
Disconnect plug connections (2) and remove B+ distributor (3).

Installation note:
Plugs are colour- and mechanically coded.
Ensure correct contacting.
B+ distributor can only be replaced as a complete unit (with fuses).