37 14 511 Replacing Front Ride-Height Sensor

37 14 511 Replacing front ride-height sensor







IMPORTANT: Observe safety instructions for raising the vehicle

NOTE:
Jointed rod to holder 37 14 4AZ.
Holder to control arm 37 14 5AZ.







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







Release screw (1).
Remove holder for ride-height sensor from front axle carrier and disconnect plug connection (3).

Installation:
Sensor lever (2) must point from ride-height sensor to left front wheel.
Tightening torque 37 14 2AZ.
Release nut (4) and remove jointed rod from sensor lever (2).

Installation:
Replace self-locking nut.
Tightening torque 37 14 4AZ.







Installation:
Align ride-height sensor holder by means of lug (1) to opening (2) in front axle carrier.







Release screws (1) and remove ride-height sensor (2).
Tightening torque 37 14 1AZ.







After installation:
- Check headlight adjustment, correct if necessary