Electrochromic Inside Mirror, Digital Compass, Integrated Universal Remote Control

Electrochromic Inside Mirror, Digital Compass, Integrated Universal Remote Control

Electrochromic inside mirror, digital compass, integrated universal remote control
The main task of inside mirror is to allow the driver to look through the vehicle from the inside to the rear. The central position in the control box means the inside mirror is also suitable to accommodate sensors and buttons.

Brief component description
The following components are described for the inside mirror:
- Inside mirror
- Roof function centre (FZD)

Inside mirror
The central position in the control box means the inside mirror assumes a number of operating and display functions. The inside mirror sends its information directly to the roof function centre (FZD).

Roof function centre (FZD)
The FZD receives information from the inside mirror. The FZD is connected across the K-CAN with the footwell module (FRM) and the junction box electronics (JBE).












System functions
Depending on the equipment specification, various system functions are available for the inside mirror. The following system functions are described:
- Electrochromic
- Integrated universal remote control
- Digital compass

Electrochromic
The electrochromic inside mirror automatically dims the mirror glass if a source of light from the rear is detected.
The electrochromic inside mirror has two sensors that measure incident light from the front and the rear. When the light source from the rear is strength, a voltage signal is output. The strength of the voltage signal depends on the light difference between the front and rear. The greater the voltage signal, the more the mirror glass is dimmed.
The electrochromic inside mirror controls the electrochromic outside mirrors via the roof function centre.

Integrated universal remote control
The integrated universal remote control replaces up to three different hand-held transmitters. The integrated universal radio remote control can learn various radio-remote-controlled facilities, e.g. garage doors and garden gates or lighting systems. The integrated universal remote control detects and learns the sent signal from each original hand-held transmitter.

Digital compass

No liability can be accepted for printing or other errors. Subject to changes of a technical nature