61 35 040 Removing and Installing/Replacing Fuse Box (SPEG)

61 35 040 Removing and Installing/Replacing Fuse Box (SPEG)







Necessary preliminary work:
- Clamp off negative battery cable
- Remove front right door sill cover strip







Disconnect plug connection (1).

NOTE: Write down colour and position of plug connectors before removing.







Disconnect plug connection (1).







Clip positive battery cable out of holder (1).
Detach positive battery cable from fuse box (2).







Unscrew nuts (1).
Remove fuse box (2).







Installation note:
Make sure journal (1) is correctly seated in guide (2).







Replacement:
- Remove fuses and relays
- Carry out vehicle programming/encoding