Audio System - CHAMP2(R) Stored Radio Stations Deleted
SI M65 02 13Audio, Navigation, Monitors, Alarms, SRS
March 2013
Technical Service
SUBJECT
CHAMP2: Stored Radio Stations Deleted After Ignition Off
MODEL
R55
R56
R57
R58
R59
R60
Produced from August 2010 to July 2012 with:
^ Option O6FP (MINI Visual Boost radio)
Or
^ Option O6UM (MINI navigation system)
SITUATION
After ignition off, the stored radio stations (AM/FM and Satellite radio) are no longer available in:
^ Menu "PRESETS"
^ Preset buttons on the head unit
CAUSE
Hardware error in the CHAMP2 head unit
CORRECTION
1. Perform a vehicle test using the latest ISTA (Integrated Service Technical Application) diagnostic software. Complete all test modules related to faults stored in the CHAMP2 head unit. Otherwise, proceed to step 2.
Note:
When the ISTA system message displays: Battery voltage only "XX.XX" V. Please connect charger. Please note the displayed battery voltage reading in the repair order comments section.
2. Replace the CHAMP2 head unit.
Note:
A Diagcode is not required for this repair when it is performed as outlined.
3. Reprogram the vehicle using ISTA/P 2.48.2 or later. New integration level: R056-12-11-502 or higher
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle Programming.
PARTS INFORMATION
WARRANTY INFORMATION
Covered under the terms of the MINI New Vehicle Limited Warranty.
Labor operation code 00 00 006 is a Main labor operation. If you are using a main labor code for another repair, use the plus code labor operation 00 00 556 instead.
Refer to KSD2 for the corresponding flat rate unit (FRU) allowance. Enter the Chassis Number, which consists of the last 7 digits of the Vehicle Identification Number (VIN). Click on the "Search" button, and then enter the applicable flat rate labor operation in the FR code field.
Even though work time labor operation code 61 00 006 ends in "006," it is not considered a Main labor operation.
Work time (WT) labor operation 61 00 006 requires an individual punch time.
If a control module fails to program correctly or initializations are required, the additional work must be claimed with separate labor operations under the defect code listed above; refer to KSD2.
Other Repairs
If performing other ISTA diagnostics and the related test plans results with eligible and covered work, claim this work with the applicable defect code and labor operations listed in KSD2.
Note:
Please follow any TeileClearing (TC) or Diagcode (DC) requirements that may apply to this additional work.