Transmission and Drivetrain: Technical Service Bulletins

• By Symptom
  • Abnormal wear/deterioration
    • M/T - Flywheel Surfacing Limit
  • Slipping
    • A/T - Slipping or No-Shift/Metal Sealing Rings
  • Slipping clutch
    • M/T - Flywheel Surfacing Limit
  • Warping
    • M/T - Flywheel Surfacing Limit
• All Technical Service Bulletins
  • Differential - Cover Sealing Manual Revision
  • Differential Fluid - Capacity Change
  • A/T Oil Cooler - Backflush Alternative
  • A/T - Perform Cooler Flow Test When Replacing A/T
  • A/T - Recommended Fluid
  • A/T - Assembly Procedures, Manual Update
  • A/T - Hydraulic Circuit, Manual Correction
  • A/T - Fluid Flow Diagrams, Manual Corrections
  • Transmission Sealant - Change of Recommendations
  • Transmission - Identification Codes
  • A/T - New End-Play and Preload Measurement
  • A/T - Engine Vacuum Testing
  • A/T - How To Use A Pressure Gauge
  • A/T - Slipping or No-Shift/Metal Sealing Rings
  • A/T - Front Bushing Wear
  • A/T - Identification
  • A/T - Math Formulas Part I
    • Overview
    • Shift Speed and Pressure
    • Speedometer Ratios
  • A/T - Twenty Steps To Successful Repairs
  • A/T - Math Part II
  • A/T - Choosing the Right ATF
  • M/T - Flywheel Surfacing Limit
  • Tools - Rear Axle Manual Revision
  • A/T - Overdrive Shift Switch Removal
  • Axle Lock Washer - Not Reusable
  • M/T - Fluid Recommendation/Caution
  • M/T - Revised Clutch Interlock Switch Service Precaution