Hazard Warning Lamps: Testing and Inspection

1. Neither the turn-signal lights nor hazard lights operate.
- Check the hazard light switch. Testing and Inspection
- Check the flasher unit.
2. All L.H. or R.H. turn-signal lights do not illuminate.
1. Hazard light is fully operational.
- Check the turn-signal light switch. Testing and Inspection
- Check the hazard light switch. Testing and Inspection
3. Flashing cycle of turn-signal lights is shorter.
- Check the light bulb.
4. Hazard light does not operate.
1. Turn-signal lights are operational.
- Check the hazard light switch. Testing and Inspection