Headlight Aiming Preparation

Headlight Aiming Preparation:

1. Measure the center of the headlight bulb as shown in the illustration.

Headlight Aiming Preparation:

2. Place vehicle on a known level floor 3m (9.8 feet) from aiming screen or light colored wall. Four lines of adhesive tape or like are required on screen or wall:
1. Position a vertical tape so that it is aligned with the vehicle center line.
2. Position a horizontal tape with reference to center line of headlight bulb.
3. Position a vertical tape on the screen with reference to the center line of each of headlights bulb.