Engine: Service and Repair

1. Scribe and remove hood, then remove battery, tray and cruise control intermediate link.
2. Relieve fuel system pressure as described under Technician Safety Information, then remove radiator assembly, skid plate, lower cover and front exhaust pipe.
3. Remove transmission and transfer assembly as described under Transmission and Drivetrain.

Fig. 2 Engine Replacement (Part 1 Of 2):

Fig. 2 Engine Replacement (Part 2 Of 2):

4. Remove engine assembly from vehicle in numbered sequence shown, Fig. 2, noting the following:
a. When removing power steering pump and A/C compressor, leave hoses attached and support aside.
b. When disconnecting oil cooler hose, use a spanner wrench or equivalent.
5. Reverse procedure to install.