G-Sensor Check

G-SENSOR OUTPUT VOLTAGE CHECK
1. Unload the vehicle and move it to a horizontal surface.






2. Connect the scan tool to the data link connector.

Caution: Turn the ignition switch off before connecting or disconnecting the scan tool.

3. Start the engine.

Caution: At this time, check to be sure that the ABS warning light illuminates for a brief period before turning off. If it does not turn off, refer to ABS Warning Light Inspection. ABS Warning Light Inspection

4. Check that the G sensor output voltage is within the standard value range.
Standard value: 2.5 ± 0.12 V

5. If the G sensor output voltage is not within the standard value range, check the installation condition of the G sensor. If there is a loose bolt, deformation of the G sensor bracket, etc., carry out a repair. If the problem is not repairable, replace the G sensor.