Rear Wiper and Washer

Low-Speed Wiper Operation
- When the wiper switch is at ON while the ignition switch at ACC or ON, the wipers operate continuously at low speed.

Auto Wiper Stop Operation
- When the wiper switch is at OFF, the cam contacts of the wiper motor cause current to flow through the auto wiper stop circuit, allowing the wiper blades to cycle before they reach the stop positions.

Intermittent Wiper Operation
- When the wiper switch is at INT while the ignition switch is at ACC or ON, the intermittent wiper relay is energized, causing the intermittent wiper relay contacts to close and open repeatedly.
- When the contacts are closed, the wiper motor is energized.
- When the wiper motor is energized, the relay contacts open; however, the cam contacts keep the wiper motor energized until the wiper blades return to the stop positions.

Washer-Wiper Operation
- When the washer switch is turned ON, the intermittent wiper relay contacts close causing wipers to cycle two to three times.