Headlamp: Service and Repair

Headlight And Front Combination Light - Removal And Installation:

Removal
To remove follow the steps listed and note the following in the image.

Front Combination Light Removal:

Step 1: Front Combination Light Removal
Remove the front combination light mounting screws and set spring, and then remove the front combination light by pulling it towards the front of the vehicle.

NOTE: For the left side, before removing the front combination light, remove the engine coolant reserve tank in advance.


Installation
To Install follow the steps listed and note the following in the image.

Headlight Installation:

Step 2: Headlight Installation
After tightening the outside mounting bolt, tighten the inside mounting nut.




Step 1: Front Combination Light Installation
1. Align the front combination light positioning bosses with the insertion holes in the fender, and align the ribs with the headlight insertion holes.
2. While pushing the front combination light in towards the rear of the vehicle, pull the set spring into the engine compartment to tighten it to the vehicle body, and then tighten with the screw.