Fixed SAS Adjustment

NOTE: The fixed Speed Adjusting Screw (SAS) should not be moved unnecessarily; it has been precisely set by the manufacturer.

NOTE: If the adjustment is disturbed for any reason, readjust as follows.




ADJUSTMENT
1. Loosen the tension of the accelerator cable sufficiently.
2. Back out the fixed SAS lock nut.
3. Turn the fixed SAS counterclockwise until it is sufficiently backed out, fully closing the throttle valve.
4. Turn the fixed SAS clockwise until the throttle lever is touched (i.e., the point at which the throttle valve begins to open).

NOTE: Monitor the TPS value with the scan tool .

From that point, turn the fixed SAS clockwise another 1-1/4 turn.
5. Hold the fixed SAS so that it doesn't move. Tighten the lock nut securely.
6. Adjust the tension of the accelerator cable.
7. Adjust the basic idle speed.
8. Adjust the closed throttle position switch and the throttle position sensor.