Alternator

DEFLECTION
Generator V Ribbed Type Drive (Reference Value)
When Checked 7.0 - 9.0 mm (0.28 - 0.35 inch)
When A New Belt Is Installed 5.5 - 7.5 mm (0.22 - 0.29 inch)
When A Used Belt Is Installed 7.5 - 8.5 mm (0.30 - 0.33 inch)

TENSION
When Checked 294 - 490 N (66 - 110 lbs.)
When A New Belt Is Installed 490 - 686 N (110 - 154 lbs.)
When A Used Belt Is Installed 343 - 441 N (77 - 99 lbs.)

TIGHTENING SPECIFICATIONS
Adjusting Bolt 10 Nm (88.5 inch lbs.)
Connector Attaching Nut 14 Nm (124 inch lbs.)
Lock Bolt 23 Nm (17 ft. lbs.)
Pivot Bolt 23 Nm (17 ft. lbs.)