How to Read Data List

Required Special Tool:
MB991502: Scan Tool (MUT-II)

CAUTION
To prevent damage to the scan tool MB991502, make sure the ignition switch is "OFF" before connecting or disconnecting the scan tool MB991502.

1. Connect scan tool MB991502 to the data link connector.




2. Turn the ignition switch "ON," and then turn ON the main switch.
3. Carry out inspection by means of the data list function. If there is an abnormality, check and repair the chassis harnesses and components.
(Refer to Data List Reference Table.)

4. Re-check using scan tool MB991502 and check to be sure that the abnormal input and output have returned to normal because of the repairs.
5. Erase the diagnostic trouble code(s).
6. Turn the ignition switch "OFF"
7. Disconnect scan tool MB991502 from the data link connector.
8. Start the engine again and do a test drive to confirm that the problem is eliminated.