Rear Wiper and Washer

REAR WIPER AND WASHER

Low-speed wiper operation

- When the rear wiper switch is placed in the "ON" position with the ignition switch in the "ACC" or "ON" position, wiper operate continuously at low speed.

Auto wiper stop operation
- When the rear wiper switch is placed in the "OFF" position, the cam contacts of wiper motor causes current to flow through the auto wiper stop circuit, allowing the wiper blades to cycle before they reach to the stop positions.

Intermittent wiper operation
- When the rear wiper switch is placed in the "INTERMITTENT" position with the ignition switch in "ACC" or "ON" position, the rear intermittent wiper wiper relay contacts to close and open repeatedly.
- When the contacts are closed, the wiper motor is energized.
- When the rear wiper motor is energized, the rear intermittent wiper relay contacts open; however, the cam contacts keep the rear wiper motor energized until the wiper blades return to their stop position.

Washer-wiper operation
- When the rear washer switch is turned "ON," the rear intermittent wiper relay contacts close causing wipers to cycle one to two times.

REMOTE CONTROLLED MIRROR
- When the remote-controlled mirror switch is operated while the ignition key is in "ACC" or "ON" position, current flows through multi-purpose fuse number 8 remote-controlled mirror switch, remote-control mirror, remote-controlled mirror switch, and ground, causing the mirror to move.