Rear Wiper and Washer

REAR WIPER AND WASHER

REMOVAL AND INSTALLATION

Removal Steps 1-9:

NOTE: For removal and installation of the column switch assembly (rear wiper and washer switch), refer to Power Steering, Steering Wheel and Shaft.

INSTALLATION SERVICE POINTS

]A[GROMMET INSTALLATION






Install the grommet so that the arrow points downwards.

]B[WIPER ARM AND BLADE ASSEMBLY INSTALLATION






Install the wiper blade so that the tip stops at the standard position (standard value), and also so that the lower section of the wiper blade enters the middle of the defogger pattern.

Standard value (A): 70 ± 5 mm (2.8 ± 0.2 inches)