Vehicle Damage Warnings

WARNING:
1. The SRS components should not be subjected to heat over 93° C (200° F), so remove the front impact sensor, SRS-ECU, air bag modules and clock spring before drying or baking the vehicle after painting. Recheck the SRS system operability after reinstalling them. (Refer to General Information - Mantenance Service)
2. If the SRS components are removed for the purpose of check, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.

If the SRS components are to be removed or replaced as a result of maintenance, diagnosis, etc., follow the appropriate procedure in this section. (Front Impact Sensor: SRS Air Bag Control Unit: Air Bag Modules and Clock Spring.)