Input Gear
DISASSEMBLY AND REASSEMBLY
DISASSEMBLY SERVICE POINT
BALL BEARING REMOVAL
Use special tool MD998801 to remove the ball bearing.
ASSEMBLY SERVICE POINTS
>A< BALL BEARING INSTALLATION
Use special tools MD998812 and MD998824 to install the ball bearing.
>B< SNAP RING INSTALLATION
1. Install the thickest snap ring that can be fitted in the snap ring groove of the input gear.
2. Make sure that the ball bearing end play meets the standard value.
Standard value: 0 - 0.06 mm (0 - 0.002 inch)