Inspection Procedure 1
DIAGNOSISSTEP 1.Check for bending, twisting or clogging of the fuel pipe or hose.
Q: Are the fuel pipe and hose in good condition?
YES: Go to Step 2.
NO: Repair or replace. Then go to Step 5.
STEP 2.Check for clogging of the In-tank fuel filter.
Q: Is the fuel In-tank fuel filter in good condition?
YES: Go to Step 3.
NO: Replace. Then go to Step 5.
STEP 3.Check the inside of the fuel tank for contamination and rust.
Q: Is the fuel tank in good condition?
YES: Go to Step 4.
NO: Clean or replace. Then go to Step 5.
STEP 4.Check the fuel pump module operation.
Q: Is the fuel pump module operation in good condition?
YES: Go to Step 5.
NO: Replace. Then go to Step 5.
STEP 5.Check symptoms.
Q: Is the engine malfunction eliminated?
YES: Finish.
NO: Replace. Then go to Step 1.