Liftgate Garnish

INSTALLATION SERVICE POINT

>>A<< MARK INSTALLATION
1. Installation position
Attach to the position shown in the illustration.

"MONTERO SPORT" Mark:

"GRADE" Mark:

"3-DIAMOND" Mark:

Mitsubishi Mark:

"4WD" Decal, "GRADE" Mark:

2. Installation procedure
1. Use 3M(TM) AAD Part number 8906 or equivalent to clean the mark installation surfaces on the body.

CAUTION: When attaching the marks, the surrounding temperature should be 20 - 38 °C (60 - 100 °F) and the air should be completely free from dust. If the surrounding temperature is low than 20 °C (60 °F), the marks and their application surface on the body should be heated to 20 - 38 °C (60 - 100 °F).

2. Peel off the backing paper from the reverse side of the marks, carefully attach the marks to the vehicle body in the exact position shown.