With Scan Tool
Erasing Diagnostic Trouble CodesThe diagnostic trouble codes can be erased by the following procedure.
NOTE: The diagnostic trouble code will not be erased even if the negative battery terminal is disconnected.
Using scan tool MB991502
Required Special Tool:
- MB991502: Scan Tool (MUT-II)
CAUTION: To prevent damage to scan tool MB991502, always turn the ignition switch to "LOCK" (OFF) position before connecting or disconnecting scan tool MB991502.
1. Connect scan tool MB991502 to the data link connector.
2. Turn the ignition switch to "ON" position.
3. Use scan tool MB991502 to check for auto-cruise control system diagnostic trouble codes.
4. Turn the ignition switch to "LOCK" (OFF) position.
5. Disconnect scan tool MB991502.