Rear Wiper and Washer
REAR WIPER AND WASHERREMOVAL AND INSTALLATION
Removal Steps 1-9:
NOTE: For removal and installation of the wiper and washer switch, refer to Power Steering, Steering Wheel and Shaft.
INSTALLATION SERVICE POINTS
]]A[[GROMMET INSTALLATION
Install the grommet so that the arrow points downwards.
]]B[[REAR WIPER ARM AND BLADE ASSEMBLY INSTALLATION
Install the wiper blade so that the tip stops at the standard position (standard value), and also so that the lower section of the wiper blade enters the middle of the defogger pattern.
Standard value: 70 ± 5 mm (2.8 ± 0.2 inches)