Input Gear
DISASSEMBLY AND REASSEMBLY
DISASSEMBLY SERVICE POINT
<> BALL BEARING REMOVAL
Use special tool MD998801 to remove the ball bearing.
REASSEMBLY SERVICE POINTS
>>A<< BALL BEARING INSTALLATION
Use special tools MD998812 and MD998826 to install the ball bearing.
>>B<< SNAP RING INSTALLATION
1. Install the thickest snap ring that can be fitted in the snap ring groove of the transfer input gear.
2. Make sure that the transfer input gear bearing end play meets the standard value.
Standard value: 0 - 0.06 mm (0 - 0.002 inch)