Liftgate Window Glass: Service and Repair

Liftgate Window Glass:

REMOVAL SERVICE POINT

[[A]] LIFTGATE WINDOW GLASS REMOVAL
Remove the liftgate window glass using the same procedure as for the windshield

INSTALLATION SERVICE POINT

]]A[[ CLIP/DUAL LOCK FASTENER/LIFTGATE WINDOW GLASS LOWER DAM/LIFTGATE WINDOW GLASS SIDE DAM/LIFTGATE WINDOW GLASS UPPER DAM/LIFTGATE WINDOW GLASS

1. Use 3M(TM) AAD Part number 8906 or equivalent to degrease the inside and outside edges of the liftgate window glass and the surface of the body flange.







2. Face the clip's claws downward, and attach to the inner side of the liftgate window glass as shown in the illustration.







3. Align the dual lock fastener to the markings on the glass, and install. Then, install the liftgate outer panel so that it is aligned.







4. Attach the liftgate glass dam from the dam attachment reference mark to the edge of the glass.
5. Apply primer and adhesive.
6. Install the glass in the same way as for the windshield.