Automatic Transmission/Transaxle: Testing and Inspection
HYDRAULIC PRESSURE TESTS1. Check the A/T fluid level and temperature. Check engine coolant temperature.
- A/T fluid level: "HOT" mark on the dipstick
- A/T fluid temperature: 70 - 80° C (158 - 176° F)
- Engine coolant temperature: 80 - 100° C (176 - 212° F)
2. Jack up the vehicle so that the wheels are free to turn.
3. Connect the special tools (2,942 kPa (427 psi) oil pressure gauge [MD998330] and adapters [MD998332, MD998900]) to each pressure discharge port.
NOTE:
^ UC: Underdrive clutch pressure port
^ RC: Reverse clutch pressure port
^ OC: Overdrive clutch pressure port
^ LB: Low-reverse brake pressure port
^ 2B: Second brake pressure port
^ TA: Torque converter apply pressure port
^ TR: Torque converter release pressure port
4. Connect the special tools (2,942 kPa (427 psi) oil pressure gauge [MD998330] and adapters [MD998332, MD998900]) to each pressure discharge port.
5. Connect the special tools (2,942 kPa (427 psi) oil pressure gauge [MD998330] and adapters [MD998332, MD998900]) to each pressure discharge port.
STANDARD HYDRAULIC PRESSURE TEST
HYDRAULIC PRESSURE TEST DIAGNOSIS TABLE
OIL SEAL LAYOUT