Inspection Procedure 21

CD Sound Skips.

DIAGNOSIS

STEP 1. Malfunction occurrence state.

Q: When does a malfunction occur?
While parking: Go to Step 2.
While driving: Stop vehicle, go to Step 4.

STEP 2. Check that the CD face scratched or dirty.

Q: Is the CD face scratched or dirty?

YES: CD is defective, or clean the CD. Check that a CD sound skip is resolved.

NO: Go to Step 3.

STEP 3. Check that the CD player plays properly if another CD is started.

Q: Does it play properly if another CD is inserted?

YES: CD is defective. Check that a CD sound skip is resolved.

NO: Repair or replace the CD player. Check that a CD sound skip is resolved.

STEP 4. Check that sound skips when the side of the CD player is tapped.

NOTE: Check by using a proper CD which is free from scratches, dirt or any other abnormality.

Q: Does sound skip when the side of the CD player is tapped?

YES: Securely mount the CD player. Check that a CD sound skip is resolved.

NO: Check the sound skipping state in detail while driving, and then contact a service shop. Check that a CD sound skip is resolved.