Hydraulic Assembly: Service and Repair

REMOVAL AND INSTALLATION

NOTE: The ABS-ECU is integrated with the hydraulic

Removal Service Points
<> Harness Connector Removal

Turn the lock lever in the direction shown in the illustration, and remove the harness.

<> Hydraulic Unit Removal

WARNING: The hydraulic unit is heavy. Use care when removing it.

CAUTION:
- The hydraulic unit cannot be disassembled. Never loosen its nuts or bolts.
- Do not drop or shock the hydraulic unit.
- Do not turn the hydraulic unit upside down or lay it on its side.

Installation Service Point
>>A<< Brake Tube Installation

Connect the tubes to the hydraulic unit as shown in the illustration.
1. Proportioning valve
2. Master cylinder
3. Proportioning valve
4. Front brake
5. Front brake