Inspection Procedure 1

INSPECTION PROCEDURE 1: Noise While Wheels are Rotating

DIAGNOSIS

STEP 1.Check whether the axle shaft is bent.
Q: Is the axle shaft bent?
YES: Replace the part. Then go to Step 3.
NO: Go to Step 2.

STEP 2.Check the axle shaft bearing for wear or damage.
Q: Is the axle shaft bearing damaged or worn?
YES: Replace the part. Then go to Step 3.
NO: Go to Step 3.

STEP 3.Check symptoms.
Q: Is the abnormal noise eliminated?
YES: Diagnosis is complete.
NO: Start over at Step 1.