| During generator drive belt inspection | Vibration frequency | A | Standard value | 197 - 241 Hz |
| | B | Standard value | 133 - 164 Hz |
| Tension | | Standard value | 392 - 588 N |
| Deflection <reference value> | A | Standard value | 6.5 - 8.9 mm |
| | B | Standard value | 9.3 - 12.5 mm |
| During generator drive belt adjustment | Vibration frequency | A | Standard value | 209 - 231 Hz |
| | B | Standard value | 142 - 157 Hz |
| Tension | | Standard value | 441 - 539 N |
| Deflection <reference value> | A | Standard value | 7.0 - 8.4 mm |
| | B | Standard value | 189 - 211 mm |
| During generator drive belt replacement | Vibration frequency | A | Standard value | 279 - 311 Hz |
| | B | Standard value | 189 - 211 Hz |
| Tension | | Standard value | 784 - 980 N |
| Deflection <reference value> | A | Standard value | 4.0 - 5.2 mm |
| | B | Standard value | 6.0 - 7.4 mm |
| Basic ignition timing at idle | | | Standard value | 5 deg BTDC +/- 3 deg |
| Actual ignition timing at curb idle | | | Standard value | Approximately 10 deg BTDC |
| CO contents | | | Standard value | 0.5% or less |
| HC contents | | | Standard value | 100 ppm or less |
| Curb idle speed | | | Standard value | 700 +/- 100 r/min |