Inspection Procedure 1

INSPECTION PROCEDURE 1: Noise During Wheel Rotation

DIAGNOSIS

STEP 1. Check the housing tube and inner shaft for bending.
Q: Is the housing tube and Inner shad bent?
YES: Replace the part. Then go to Step 4.
NO: Go to step 2.

STEP 2. Check the inner shaft bearing for wear.
Q: Is the inner shaft bearing worn?
YES: Replace the bearings. Then go to Step 4.
NO: Go to Step 3.

STEP 3. Check the driveshaft assembly for wear, damage or bending.
Q: Is the driveshaft assembly worn, damaged or bent?
YES: Replace the driveshaft assembly. Then go to Step 4.
NO: There is no action to be taken.

STEP 4. Check symptoms.
Q: Is the abnormal noise eliminated?
YES: Repeat to Step 1.
NO: This diagnosis complete.