Inspection Procedure 7

INSPECTION PROCEDURE 7: Noise While Turning

DIAGNOSIS

STEP 1. Check the side bearing for wear or damage.
Q: Is the side bearing worn or damaged?
YES: Replace the part. Then go to Step 3.
NO: Go to step 2.

STEP 2. Check the side gear, pinion gear or pinion shaft for damage.
Q: Is the side gear, pinion gear or pinion shaft damaged?
YES: Replace the part. Then go to Step 3.
NO: There is no action to be taken.

STEP 3. Check symptoms.
Q: Is the abnormal noise eliminated?
YES: Repeat to Step 1.
NO: This diagnosis complete.