Procedures
ON-VEHICLE SERVICEPAIRING A CELLULAR PHONE OR DELETING A PHONE
NOTE:
- Some Bluetooth� cellular phones may not be compatible with the hands free-ECU
- A maximum of seven Bluetooth� cellular phones can be registered.
- The hands free cellular phone system can not be used when a battery of Bluetooth (R) cellular phone was exhausted.
PAIRING A CELLULAR PHONE
1. Shift the selector lever to "P" (parking) position and pull the parking brake lever.
2. Turn the ignition switch to "ACC" or "ON" position.
3. Press the SPEECH button.
4. Say "Setup."
5. Say "Pairing options."
6. The voice guide will say "Do you want to Pair a phone, delete a phone or list paired phones?"
7. Say "Pair a phone."
8. The voice guide will say "This operation should only be performed while the vehicle is parked. Please say continue to perform this operation." Say "Continue."
9. The voice guide will say "Please say a 4-digit pairing code."
10. Say a 4 digit code. The 4 digit code will be registered as a pairing code for the phone.
- When the confirmation function is on, the system will confirm whether the number said is acceptable. Answer "Yes" to go Step 10. Say "No" to return to pairing code selection.
NOTE:
- The pairing code entered here is only used for the Bluetooth� connection certification. It is any 4-digit code the user would like to select.
- Remember the pairing code as it needs to be keyed into the phone later in the pairing process.
- Depending on the selected Bluetooth� connection settings, entry of the paring code may be required each time the Bluetooth� cellular phone attempts to connect to the hands free cellular phone system. Refer to your cellular phone owner's manual for connection defaults and settings.
11. The voice guide will say "Start pairing procedure on phone. See phone's manual for instructions." Refer to the owner's manual for your cellular phone and enter into the phone the pairing code that was registered in Step 10.
12. When the hands free cellular phone system finds a Bluetooth� cellular phone, the voice guide will say "Please say the name of the phone after the beep."
13. After you hear the beep, name the phone by saying a name of your preference.
NOTE:
- When the hands free cellular phone system cannot recognize the Bluetooth� cellular phone, the pairing process will end and the system will beep and then return to normal status.
- Try the pairing process again after reconfirming whether or not the Hands free cellular phone system supports your Bluetooth � compatible cellular phone.
14. The voice guide will say "Assign a priority for this phone between 1 and 7 where 1 is the phone used most often."
15. Say a number between 1 and 7 to set a priority level for the cellular phone.
- If you selected a priority level that has already been set for a different phone, the hands free cellular phone system will ask you whether you wish to override that priority level. To override the priority level, answer "Yes." Answer "No" to return to the priority level selection in Step 14.
16. After the voice guide says "[phone tag] set to priority [priority]," the hands free cellular phone system will start the pairing process. Wait a moment for the pairing process to complete.
- When the confirmation function is "ON", the hands free cellular phone system will confirm the assigned phone name and priority again. Answer "Yes" to go to next step, or answer "No" to return to the priority level selection in Step 13.
17. When the pairing process is completed, the voice guide will say "Pairing Complete." The hands free cellular phone system will then beep and the voice recognition mode will be deactivated.
DELETING A PHONE
1. Turn the ignition switch to "ACC" or "ON" position.
2. Press the "SPEECH" button.
3. Say "Setup."
4. Say "Pairing options"
5. The voice guide will say "Do you want to Pair a phone, delete a phone or list paired phones?"
6. Say "Delete a phone."
7. After the voice guide says "Please say," it will read out each priority number and phone name pair in order, starting with the phone that has the highest priority level (from 1 to 7). After it completes reading all pairs, the voice guide will say "or all, or say cancel to return to main menu."
8. Say the priority number of the phone that you want to delete from the system. Say "All" to delete all paired phones from the system, or "Cancel" to end the deletion process and return to the main menu.
9. For confirmation purposes, the voice guide will say "Removing [phone tag] (all) is this correct?" Answer "Yes" to delete the phone(s). If you answer "No," the voice guide will ask "Which phone please?" Say again the priority number of the phone that you want to delete from the hands free cellular phone system.
10. When the phone deletion process is completed, the voice guide will say "Deleted." The hands free cellular phone system will then beep and the voice recognition mode will be deactivated.
- If the phone deletion process fails for some reason, the voice guide will say "Delete failed." The hands free cellular phone system will then beep and the voice recognition mode will be deactivated. Start over again from Step 1.
ERASE THE PASSCODE
The 4-digit passcode set by security function can be erased by operating the PHONE button.
1. Turn the ignition switch to the "ON" or "ACC" position.
2. Check that the hands free cellular phone system is not in voice recognition mode.
3. Press and hold the PHONE button for approximately 2 seconds (1.5 seconds or more).
4. Within approximately 10 seconds after performing step 3, press and hold the PHONE button for approximately 2 seconds (1.5 seconds or more) twice again.
NOTE: Even if the passcode is erased, guidance such as voice guide is not provided.
5. After the operation, check if the lock with the passcode is unlocked. If the lock is not unlocked, repeat from step 2.