Inspection Procedure 2

INSPECTION PROCEDURE 2: When the Air Outlet Changeover Control Knob is Moved to DEFROSTER or DEFROSTER/FOOT Position, the A/C or the Inside/outside Air Changeover Damper Motor does not operate.

TECHNICAL DESCRIPTION (COMMENT)
If the outside/inside air selection damper control motor does not operate normally, the inside/outside air changeover damper motor system may be defective.

TROUBLESHOOTING HINTS
- Malfunction of the A/C-ECU
- Malfunction of the outside/inside air selection damper control motor
- Damaged harness wires or connectors

DIAGNOSIS

Check operation of the outside/inside air selection damper control motor.

1. Turn the ignition switch to the "ON" position.
2. Outside/inside air selection damper motor switch: This is used to switch from the inside air to outside air or vice versa.
3. Check to see that the outside/inside air selection damper motor operates normally.

Q: Does outside/inside air selection damper control motor work normally?

YES : Replace the A/C-ECU.

NO : Refer to Inspection procedure 3, "Inside/outside air changeover is not possible". Inspection Procedure 3