Fog Light Adjustment

FOG LIGHT ADJUSTMENT






1. Check if the beam shining onto the screen is at the standard value.






2. If it is not within the standard value range, adjust by turning the adjusting screw.

Standard value:
(Vertical direction): Top of the hot zone should be 101 mm (4.0 inches) (0.76°) downward from the height of the fog light center.

Limit:
(Vertical direction): Top of the hot zone should be 152mm (6.0 inches) (1.14°) in maximum downward from the height of the fog light center.

NOTE: The horizontal direction is non-adjustable. If deviation of the light beam axis exceeds the standard value, check that the mounting location or some other points are not faulty.