Removal and Replacement
IGNITION SWITCHREMOVAL AND INSTALLATION
WARNING:
- Before removing the steering wheel, air bag module assembly and clock spring and Air Bag Module and Clock Spring.
- When removing and installing the steering wheel, do not let it bump against the air bag module.
CAUTION: If the steering lock cylinder is replaced by the handle lock service key set at the same time with ignition key, register the ignition key.
Removal Steps 1-2 (Part 1):
Removal Steps 1-2 (Part 1):
REMOVAL SERVICE POINTS
[[A]] STEERING COLUMN UPPER COVER/STEERING COLUMN LOWER COVER REMOVAL
1. Rotate the steering wheel with a slightly from side-to-side to access and remove the mounting screws.
[[B]] STEERING LOCK CYLINDER REMOVAL
1. Insert the key in the steering lock cylinder and turn it to the "ACC" position.
2. Using a small Phillips head screwdriver, pull the steering lock cylinder toward you.