Windshield Wiper
WINDSHIELD WIPERREMOVAL AND INSTALLATION
Removal Steps 1-19:
NOTE: For removal and installation of the wiper and washer switch, refer to Chassis Electrical, Column switch.
INSTALLATION SERVICE POINTS
]]A[[ WIPER ARM AND BLADE ASSEMBLY (RH) INSTALLATION
Install the wiper blade at the specified position (standard value).
Standard value (B): 69 ± 5 mm (2.70 ± 0.20 inches)
]]B[[ WIPER ARM AND BLADE ASSEMBLY (LH) INSTALLATION
Install the wiper blade at the specified position (standard value).
Standard value (D): 63 ± 5 mm (2.47 ± 0.20 inches)
]]C[[ WIPER BLADE RUBBER/ WIPER BLADE ASSEMBLY INSTALLATION
CAUTION: Ensure that the backings are bent in the direction indicated, and then install the backings to the wiper blade rubber.