Clutch: Service and Repair

REMOVAL AND INSTALLATION









INSTALLATION SERVICE POINTS

]]A[[ CONCENTRIC SLAVE CYLINDER / CONCENTRIC SLAVE CYLINDER ADAPTER INSTALLATION





1. After setting the concentric slave cylinder to the transaxle case, tighten the flange bolt temporally.





2. Assemble the concentric slave cylinder adapter with the concentric slave cylinder.
NOTE:
Fit into the groove of the transaxle case.

3. Tighten the flange bolt to the specified torque.
Tightening torque: 10± 2Nm (89± 17 in-lb)


]]B[[ CLUTCH SET INSTALLATION





1. Apply Mitsubishi grease to the clutch disc splines and rub it into the splines with a brush.
Specified grease:

Mitsubishi Part No. 0101011 or equivalent
2. Use the general service tool to position the clutch disc on the flywheel.
3. Install the clutch cover onto the flywheel.