Headlamp: Service and Repair

HEADLIGHT REMOVAL AND INSTALLATION













REMOVAL SERVICE POINTS

[[A]]
HEADLIGHT BULB REMOVAL [VEHICLES WITH DISCHARGE HEADLIGHT]

CAUTION:
Do not touch the bulb surface with bare hands or dirty gloves.
If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.





1. Twist the socket cover to remove.





2. Disconnect the igniter.





3. Release the bulb securing spring, and remove the bulb.

[[B]]
HEADLIGHT CONTROL UNIT (HARNESS) REMOVAL [VEHICLES WITH DISCHARGE HEADLIGHT]





When removing the wiring harness from the headlight assembly, because the wiring harness is fixed using the resin washer, remove by pressing out the wiring harness to above the resin washer.

INSTALLATION SERVICE POINT

]]A[[
HEADLIGHT CONTROL UNIT INSTALLATION [VEHICLES WITH DISCHARGE HEADLIGHT]

When installing the wiring harness to the headlight assembly, fit the wiring harness into the resin washer.