Front Wipers
WIPER MOTORFig. 36 Wiper Motor Connector Identification:
Refer to Fig. 36 for connector terminal identification.
High & Low Speed Operation Check
1. Connect battery positive to terminal 1 and battery negative to terminal 5, ensure low speed operation.
2. Connect battery positive to terminal 1 and battery negative to terminal 2, ensure high speed operation.
Automatic Stop Operation Check
1. Operate motor at low speed.
2. Stop motor anywhere except at the off position by disconnecting terminal 5.
3. Connect terminal 5 to terminal 6, connect battery positive to terminal 1.
4. Ensure motor stops at the off position after motor operates again.