Front Wipers
WIPER MOTORFig. 16 Wiper Motor Connector Identification:
Refer to Fig. 16 for terminal identification of wiper motor.
Low Speed Operation Check
1. Connect battery positive to terminal 4 and battery negative to terminal 1, ensure low speed operation.
High Speed Operation Check
1. Connect battery positive to terminal 4 and battery negative to terminal 2, ensure high speed operation.
Automatic Stop Operation Check
1. Connect battery positive to terminal 4 and battery negative to terminal 1, and run at low speed. Disconnect terminal 4, motor should stop.
2. Connect terminals 1 to 3, connect battery positive to terminal 4 and battery negative to wiper motor bracket. Wiper motor should start to run then stop.
WIPER RELAY
Fig. 17 Wiper Relay Connector Identification:
1. Ensure continuity between terminals when battery voltage is applied to terminal 2 and terminal 5 is grounded, Fig. 17.
WASHER MOTOR
Fig. 18 Washer Motor Connector Identification:
1. Connect Battery positive to terminal 2 and battery negative 1, washer motor should run, Fig. 18.