Vehicle Damage Warnings

If the SRS components are to be removed or replaced as a result of maintenance, troubleshooting, etc., follow each procedure. (SRS Air Bag Control Unit, Air Bag Modules and Clock Spring.)

CAUTION:
1. SRS components should not be subjected to heat over 93°C (200°F), so remove the SRS-ECU, air bag modules and clock spring before drying or baking the vehicle after painting. Recheck SRS system operability after re-installing them. Please include instructions or where instructions may be found, for "Recheck SRS system operability". (Refer Maintenance Service.)
2. If the SRS components are removed for the purpose of check, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.