Alternator

DEFLECTION (REFERENCE VALUE)
Inspection 6.0-9.0 mm (0.236-0.354 inch)
When A New Belt Is Installed 4.0-5.0 mm (0.157-0.196 inch)
When A Used Belt Is Installed 6.0-8.0 mm (0.236-0.315 inch)

TENSION
Inspection 350-600 N (77-132 lbs.)
When A New Belt Is Installed 700-900 N (155-198 lbs.)
When A Used Belt Is Installed 450-600 N (99-132 lbs.)

TIGHTENING SPECIFICATIONS
Alternator Bracket Bolt 14 Nm (10 ft. lbs.)
Generator Pivot Nut 23 Nm (17 ft. lbs.)
Tensioner Pulley Nut 50 Nm (36 ft. lbs.)
Tensioner Bracket Bolt 42 Nm (30 ft. lbs.)