Provisional Diagnostic Trouble Codes

PROVISIONAL DTCs [MUT-II OBD-II Test Mode - Results (Mode 5)]
MUT-II will display the Provisional DTCs reported by engine control module (ECM) /powertrain control module (PCM) if the ECM/PCM detects some malfunction for "Misfire", "Fuel System" and "Comprehensive" monitoring during a SINGLE Driving Cycle.

The intended use of this data is to assist the technician after a vehicle repair, and after clearing diagnostic information, by reporting test result after a SINGLE Driving Cycle.

Note that the test results reported by this mode do not necessarily indicate a faulty component/system. If test results indicate a failure after ADDITIONAL (consecutive) driving, then the MIL will be illuminated and a DTC will set.