Service Specifications
| Basic ignition timing at idle | Standard value | 5 deg BTDC +/- 3 deg |
| Actual ignition timing at idle | Standard value | Approximately 10 deg BTDC |
| CO content | Standard value | 0.5 % or less |
| HC contents | Standard value | 100 ppm or less |
| Curb idle speed | Standard value | 700 +/- 100 r/min |
| Cylinder head bolt shank length | Limit | 99.4 mm |
| Auto-tensioner pushrod movement | Standard value | Within 1.0 mm |
| Auto-tensioner rod protrusion | Standard value | 3.8 - 4.5 mm |
| Timing belt B tension | Standard value | 5 - 7 mm |