Service Specifications
| Brake booster push rod protruding length | Standard value | 10.28 - 10.53 mm | |
| Brake pedal height | Standard value | 175 - 178 mm | |
| Brake pedal free play | Standard value | 3 - 8 mm | |
| Brake pedal to floor board clearance | Standard value | 90 mm or more | |
| Proportioning valve output fluid pressure | Split point | Standard value | 2.7 - 3.2 MPa |
| Output fluid pressure <input fluid pressure: 9.8 MPa> | Standard value | 4.3 - 5.1 MPa | |
| Proportioning valve output fluid pressure difference between left and right | Limit | 0.8 MPa | |
| Disc brake pad thickness | Standard value | 10.0 mm | |
| Limit | Minimum 2.0 mm | ||
| Disc brake disc thickness | Front | Standard value | 26.0 mm |
| Limit | Minimum 24.4 mm | ||
| Rear | Standard value | 10.0 mm | |
| Limit | Minimum 8.4 mm | ||
| Disc brake disc run-out | Front | Limit | 0.06 mm |
| Rear | Limit | 0.08 mm | |
| Front disc brake drag force | Standard value | 69 N or less | |
| Rear disc brake drag force | Standard value | 69 N or less | |
| Rear drum brake lining thickness | Standard value | 4.9 mm | |
| Limit | Minimum 1.0 mm | ||
| Rear drum inside diameter | Standard value | 228.6 mm | |
| Limit | 230.6 mm | ||
| Rear disc inside diameter | Standard value | 168.0 mm | |
| Limit | 169.0 mm | ||
| Front hub end play | Limit | 0.05 mm | |
| Rear axle shaft end play | Limit | 0.05 mm |