Torque Specifications

Cylinder Head Bolt Removal Sequence:

Cylinder Head Bolt Torque Sequence:

Tightening procedure:
1. Tighten all bolts to 29 Nm (22 ft-lb).
2. Tighten all bolts to 78 Nm (56 ft-lb).
3. Loosen all bolts completely.
4. Tighten all bolts to 29 Nm (22 ft-lb).
5. Tighten all bolts to 74 to 83 Nm (54 to 61 ft-lb) or if you have an angle wrench, turn all bolts 90 to 95 degrees clockwise.
a. After engine has been operated for several minutes, retighten if necessary.
b. When performing normal maintenance and inspection, first loosen each cylinder head bolt slightly, then tighten to a torque of 74 to 83 Nm (54 to 61 ft-lb). (This should be done when engine is cold.)

Crankshaft Main Bearing Cap Bolt Torque Sequence: